Facebook Twitter
HOME MARKET FORUM WIKI ABOUT SUPPORT DOWNLOAD
HomeHomeCommunity (Publ...Community (Publ...Getting Started...Getting Started...Refinery OrganizationRefinery Organization
Previous
 
Next
New Post
3/23/2012 11:09 AM
 
A discussion started in another thread regarding the organization of refineries.  For organizations sake I move the conversation here, from http://starjackonline.com/Forum/tabid....

Midway wrote:
I have 4.5 with the following breakdowns of usage;

Fersium Refinery - 100% devoted to Fersium Q40 Bars - Still production left over, probably 50% - (Once fully TL19 I might add Porsite/Alladium for Ship Building or Extra Seradine

Q52 Bar Refinery - Q52 production of Margoon, Groborium, Litha, Terat, Ryllium, Ausrum, and Ineon - Still have left over production time, roughly 40%, will need to investigate further use once fully TL19 (Possible Seradine or Ship building Porsite/Alladium)
 
Trynobalt Refinery - Q64 Trynobalt and its sub level requirements (Q64 Fersium Bar & Dylicon Bar) - Fully TL19 (aside from support buildings for now) and 100% focus required to production.

Seradine Refinery - Q76 Seradine and its sub level requirements (Q76 Fersium, Dylicon, Alladium, Terat Bars along with Q76 Porsite & Trynobalt) - Fully TL19 (aside from support buildings for now) and 100% focus required - Current Choke Point of production.

Shipyard Refinery 
(60% of overall Infrastructure rest to shipyards) - Q56 Porsite & Q40 Alladium - Keeps up production on my shipyard but not scalable and will need to look into solutions. 


I'm open to suggestions of restructuring.  I've thought about splitting production by resources instead of production type (trynobalt/seradine) but the issue i see is extra required merchant shipping plus I'm not sold that it will increase production.   Not to mention I will have to produce higher quality bars then maybe necessary for Seradine vs Trynobalt or base Q52 production.  Obviously "Electing" time is a big limiting factor on my Seradine and to a lesser degree Trynobalt refineries but the number of refineries required to approach other solutions would be hard to predict but maybe speed up overall production and allow for a larger factory build rate and shipyard built rate.
 

My thoughts have been around organizing refineries based on "level" of resources.  From TL1-4 you need Alladium and Fersium, TL5-9 you add Unerogan, Dylicon, Teratetrium, TL10-14 you add Ausrum, Lithadide, Ineon, Trynobalt and Porsite, and finally TL15-19 you add Seradine, and the others I don't know the names of.

So, in my head my plan for 15+ is,

Refinery 1 - Fersium, Alladium
Refinery 2 - Dylicon, Teratetrium, (Unerogan if I never need it again)
Refinery 3 - Ausrum, Ineon, Lithadide, Porsite, Trynobalt
Refinery 4 - Seradine, plus other TL15 resources

I have not stressed my production line yet at TL14 so I do not know if my theory works.  Today I plan to start upgrading my research to TL14 so I can get some decent prototypes going.  After that I will be able to start testing.

What I like about my plan is that if I am making a building I am taking a single resource from each refinery.  I tend not to build ships and buildings at the same time.  If I had to really ramp up ship production I would probably split my Refinery 1 into two different refineries.

So Currently I have Refineries 1, 2, and 3 built.  They are just barely making TL14 resources thanks to 25 x TL14 refineries from Valtek.  Refineries 1 and 2 are on hostile worlds, while refinery 3 is a little larger and on a garden.

In terms of shipping, I have mines in 3 systems, and 4 fleets picking up all the ore.  Then I have a delivery fleet for each refinery.

~~~ Imperium Sphaerae Jovis ~~~
New Post
3/23/2012 5:51 PM
 
My setup back at t14(/15) while I was still playing;
#1 Q44 "special" resources
#2 for fersium bars q32+q24(core trade)
#3+#4 Trynobalt+Seranide
#5 q24 fersium, q36 Ausrum, helping with tryno/Seranide

Using 2x factories (158+162k). First one focused on higher tech while second one focused on making stuff for CORE t12 trade. Shipyard wasn't that much in use since I often outsourced ship building to keltor. Just made some special orders there now and then and threw stuff in with 500k mega cargo fleets with automated resources in/ships out.

Big thing to remember, when level of tech to manufacture changes, so does balance on how much refining power each part of empire needs. I had everything quite well in balance since this stuff is something you can just count. :) Also, complex alloys take sevenfold refining power compared to simple bars that are refined just once.

Little scenario; Trynobalt caps 2500/minute due whatever reason you want. This can be burned with 1 factory planet. It's just copy from my memo sheet, fersium required doesn't take fersium used for (complex) alloys into account.

CHOKEPOINT
2500 Trynobalt


Consumption
t14
t12
t15
Fersium ORE q24 15625 q24 25000 q32 13750
Special ORE q32 9687,5 q32 14375 q40 8750
Special BAR q44 8750 q36 8125 q32 7750
Fersium BAR q32 5937,5 q24 13750 q44 5500
Trynobalt q56 2500 q48 2500 q56 2500
Seranide



q60 250







Special
18437,5
22500
16500
Fersium
21562,5
38750
19250

Refining Required
t14
t12
t15
Fersium-32 q32 87336 q32 202252 q32 80901
Fersium-24 q24 53687 q24 124327

Q44-44 q44 224950 q44 208882 q44 199241
Q44-36 q36 157878 q36 146601

Trynobalt q56 297848 q56 297848 q56 297848



q48 225318

Seranide q60


q60 78835







Combined
610134
708982
656825
Optimized
610134
496246
656825
New Post
3/23/2012 10:28 PM
 
All of this depends on the building rate as that puts more stress on refineries.  But right now I'm running into an issue with both Seradine and Trynobalt not producing enough to keep up with my build rate.  If I improve one, then the other can't keep up.   If I put a second refinery planet to support either then the other runs out. 
New Post
3/23/2012 11:01 PM
 
Issues I see with your strategy ISJ;

Refinery 1 - Fersium, Alladium
Refinery 2 - Dylicon, Teratetrium, (Unerogan if I never need it again)
Refinery 3 - Ausrum, Ineon, Lithadide, Porsite, Trynobalt
Refinery 4 - Seradine, plus other TL15 resources


Refinery 1 - This is fine, basically what I'm doing and Fersium needs will require this.
Refinery 2 - Could work but you'd have to create Dylicon & Terat Quality levels of Q44-Q52 + Q56-Q64(Trynobalt) + Q64-Q76(Seradine).  That's six different requirements.
Refinery 3 - Ausrum, Ineon have limited to no use after TL14 (only necessary for facility building to sell to CORE), Litha remains critical until Q52. 
Refinery 4 - You'll have a very hard time doing Grob, Margoon, Ryllium and Seradine on the same refinery planet.

I'm curious how this will do once you get to TL16.   Bastrion will also be an issue, this is another complex alloy similar to Seradine for Ship Building. 
Previous
 
Next
HomeHomeCommunity (Publ...Community (Publ...Getting Started...Getting Started...Refinery OrganizationRefinery Organization